BMS-616MG Super Strong Car Servo JR/Hitec - OVERSTOCK SALE
Item: 1 of 8
Click on image for larger or alternate view.
Weight:
45 grams / 1.60 oz.
Size:
40.5 x 20.0 x 38.5 mm / 1.60 x 0.78 x 1.54 in.
Torque At 4.8V:
n/a
Speed At 4.8V:
n/a
Torque At 6.0V:
128 oz.in. / 9.2 kg-cm
Speed At 6.0V:
0.12 sec / 60°
Ball Bearing:
Dual
Metal Gears:
Yes
This servo is for car use only. Designed for the demands of racing, it includes a heat-sink for the motor and double ball-bearings.
This servo comes with a servo accessory package and is made with a heavy duty servo case. This servo comes with JR/Hitec S Connector also known as a "Universal Connector". Note: Even thought this servo comes with JR/Hitec S Connectors, this servo is electrically compatible with Futaba receivers. Follow the wiring diagram below. If you hook this up incorrectly nothing bad will happen to the servo. Just flip the S connector and around and the servo will work correctly.
"S" Type Connector
Futaba "J" Connector
Wire Info
Brown Wire
Black Wire
Battery Negative
Red Wire
Red Wire
Battery Positive
Orange Wire
White Wire
Signal
WARNING: Using the servo arm to turn the servo may cause the gears to break or jump and the
servo will stop functioning correctly. This is true for all servos regardless of servo manufacturer. This can also occur as a result of crash damage, hard landing, or improper servo installation. It is important you follow Servo Installation Diagram for proper installation and prevent vibration damage.
BP Hobbies assumes no responsibility once this product is installed and used.
