|
|
Catalog > Servos and Parts > Blue Bird Servos > Digital Servos
|
|
|
BMS-810DMG+HS High-Torque Metal Gear Digital Servo With Heat Sink For Airplanes
|
Item: 11 of 15
|
|
|
Click on image for larger or alternate view.
|
|
Weight:
|
45 grams / 1.60 oz.
|
|
Size:
|
40.5 x 20 x 37 mm / 1.60 x 0.78 x 1.52 in.
|
|
Torque At 4.8V:
|
104 oz-in.
|
|
Speed At 4.8V:
|
0.19 sec / 60°
|
|
Torque At 6.0V:
|
116 oz-in.
|
|
Speed At 6.0V:
|
0.17 sec / 60°
|
|
Ball Bearing:
|
Dual
|
|
Metal Gears:
|
Yes
|
|
|
With an integral heat-sink, these servos are designed for the demands of competition racing, keeping the motor cool even when the outside temperature is hot and the servo is being overused. With a heavy duty rubber-sealed waterproof case and high-strength horn set, this servo is perfect for high-performance and large-scale airplanes. And the output splines are compatible with aftermarket 25 tooth Futaba horns.
The servo will automatically learn the user's transmitter pulse timings and lock into the signal every time. The servo also includes a signal buffer in the CPU with fail-safe functionality. The motor is wound with 2PEW thin coated wire for better electrical conductivity and is able to withstand over 120° C without degradation.
Features:
Carbon nylon gear with smooth curvature
Double M9.6 ball bearing (si-oil)
3 pole high-torque motor with low RF noise (CE certified)
Rubber seals for waterproof case
Futaba compatible 25 tooth output splines
Heavy duty servo case
Integral heat sink
Digital motor drive with ultra-square PWM signal
Automatic determination of servo center pulse width
Metal gears of aluminum 6061 material combined with light and strong C95 material
Fail-Safe function
2PEW coated motor wire for high-temperature use
Digital control IC - SOP package with 12bit data transfer
MOS-FET motor driver chips that can handle 7A peak loads
The servo comes with an accessory package and the universal JR/Hitec "S" Connector which is physically and electrically compatible with all major receiver brands sold worldwide. Follow the wiring diagram below. If you hook the servo up incorrectly nothing bad will happen - just flip the S connector around and the servo will work correctly.
|
"S" Type Connector |
Futaba "J" Connector |
Wire Info |
|
Brown Wire |
Black Wire |
Battery Negative |
|
Red Wire |
Red Wire |
Battery Positive |
|
Orange Wire |
White Wire |
Signal |
WARNING: Using the servo arm to turn the servo motor may cause the gears to break or jump and the servo will stop functioning correctly. This is true for all servos regardless of servo manufacturer. BP Hobbies assumes no responsibility once this kind of damage. This can also occur as a result of crash damage or hard landing. Once you install and use a servo BP Hobbies assumes no responsibility any damages that may occur.
Replacement Parts & Accessories:
BMS-810DMG/820DMG/830DMG Metal Gear Set
BMS-8xxDMG Outside Case
BMS-8xxDMG Horn and Accessory Set
Manufacturer's Specifications
|
|
Price: $33.88
|
|
|
|
Prices, product specifications, and product availability are subject to change without notice.
|
|
|
© Copyright 1998-2008, 2009 BP Hobbies, LLC. All rights reserved.
|
|
