|
B6+ Smart Balancer with CEHN-7 Cable
|
Item: 2 of 9
|
|
|
|
|
Input Voltage
|
30V Max
|
|
Input Current
|
6 A Max
|
|
Output Voltage
|
30V Max
|
|
Output Current
|
6A Max
|
|
Operating Temperature
|
32 - 104 F / 0 - 40 C
|
|
Dimension
|
85 x 52 x 13mm
|
|
DC Input Leads
|
200 mm silicone cable
4mm gold banana plug
|
|
DC Output Leads
|
100mm silicone cable
alligator clamps
|
|
|
LED indicates the balance of the battery pack. "FLASH" shows a high voltage cell is discharged until the difference of the voltage has reached lowest level. If all LEDs are off, the battery pack is balanced.
The B6+ can be used in stand alone mode to balance a pack.
When used with the LiPo charger you can simultaneously charge and balance. Here are the steps:
Step 1. Connect LiPo charger to the input lead on the B6+
Step 2. Connect the B6+ to the balancing connector on your pack
Step 3. Connect the B6+ output lead to the pack's discharge lead
Your pack is now charging and balancing simultaneously. Simultaneous mode is limited to a 6A charging rate.
Stand Alone Mode:
|
|
Charge and Balance Mode:
|
Manufacturer's Operating Instructions (PDF file 151,552 bytes)
|
|
Price: $29.95
|
