Includes:

Laser cut - painted foam kit

Landing gear and wheels

Supporting hardware package

You Will Need:

Transmitter / Receiver - 4 Channel JST style receiver like the Corona RS400 Full Range DSP Receiver with JST connectors

Motor / Prop / ESC / Flight Battery

2 x Blue Arrow S0251 Micro Servo with White Micro JST Connector

Suggested Motor Combo:

ELE C10 2900Kv Brushless Outrunner Motor

4 x 2.5 Direct Drive Black Electric Propeller (EP-4025)

and GWS AD001 Push-on Rubber Spacer (GW/AD001) or use a prop saver - Prop Saver for 1.5mm shaft

Castle Creations Thunderbird-6 Brushless Speed Controller (TB-6) or Feigao 6-Amp Brushless Speed Controller (FG-BLESC-6A). Note- for either speed controller you will need to replace the BEC plug with a JST male in order to use the receiver. Plugs are located here - Micro JST connectors

For slower flying use the PolyQuest XP Lithium Polymer 7.4V 300mAh 20C with red JST or for faster flying use the PolyQuest XP Lithium Polymer 11.1V 300mAh 20C with red JST