View By Product Type
View By Manufacturer
Overstock Sales
Closeouts
Cheetah RC Servos
Blue Bird Servos
Hitec Servos
Corona Digital
Accessories and Control Hardware
Other Brands
 
Catalog > Servos and Parts > Corona Digital
Previous Item     Next Item     Show All Items       Add To Shopping Cart      
Corona DS-558MG High Torque Digital Metal Gear Servo
Item: 8 of 15  
  Weight:     58 Grams / 2.1 oz  
  Size:     20 x 40x 38.5 mm / 0.78 x 1.57 x 1.51 inches  
  Torque At 4.8V/6.0V:     130 oz in / 139 oz in  
  Speed At 4.8V/6.0V:     0.22 sec / 0.20 sec @ 60 deg  
  Ball Bearing:     Yes  
  Metal Gears:     Yes  

Click on image for larger or alternate view.
Standard size high torque servo for large 3D Helicopters or Airplanes. Specially designed for 3D electric helicopter. Faster, Stronger, and More accurate. Comes with cross and circle servo horn, mounting screws, and grommets.
  • Higher resolution

  • The tightest dead band

  • Accurate positioning

  • Faster control response

  • Quicker acceleration

  • Constant torque throughout the servos travel

  • Increased holding power when stationary

  • For optional larger servo arms, use the Heavy Duty Servo Arms (black)
    The servo comes with an accessory package and the universal JR/Hitec "S" Connector which is physically and electrically compatible with all major receiver brands sold worldwide. Servo leads are eight inches long from case to end of plug. Follow the wiring diagram below. If you hook the servo up incorrectly nothing bad will happen - just flip the S connector around and the servo will work correctly.

      "S" Type Connector    Futaba "J" Connector    Wire Info 

    Brown Wire

    Black Wire

      Battery Negative 

    Red Wire

    Red Wire

      Battery Positive 

    Orange Wire

    White Wire

    Signal


    WARNING: Using the servo arm to turn the servo motor may cause the gears to break or jump and the servo will stop functioning correctly. This is true for all servos regardless of servo manufacturer. BP Hobbies assumes no responsibility once this kind of damage. This can also occur as a result of crash damage or hard landing. Once you install and use a servo BP Hobbies assumes no responsibility any damages that may occur.

    Price: $14.25
    Add To Shopping Cart    
    Prices, product specifications, and product availability are subject to change without notice.
    © Copyright 1998-2017, 2018 BP Hobbies, LLC. All rights reserved.