Previous Item     Next Item     Show All Items      
BP Hobbies PT-19 26CC ARF
Item: 0 of 0  

Click on image for larger or alternate view.
  Wing Span     80 inch  
  Wing Area     950 sq in  
  Length     61 inch  
  Weight     12.5 pounds ARF Weight  
  Radio     7 Servos (8 if gas/glow powered)  
  Power     20CC to 26CC Gas Engine / A4130-8 Electric Motor / 1.2-1.4 2S / 1.5 - 1.8 4S  
The PT-19 is the classic WW II US Aircorp trainer with its large wing area and light weight was a stable performer. It is capable of mild aerobatics. This all wood model is designed for electric, glow or gas. The entire cockpit area is removable for easy access to the battery compartment. The tail feathers are built up airfoils. This is an IMAA legal model. This kit comes with Fowler Flaps. It can be powered with gas, glow or electric power. This is for intermediate to advanced pilots.
What this kit includes:
The PT-19 ARF comes with all of the hardware that you need to complete the airplane. Landing gear, control horns, gas tank, and a spinner are included. Airframe is expertly covered in blue and yellow Oracover. ARF comes with paper construction manual including CG and control throws.
What you will need to complete this airplane:
  • Transmitter / Receiver: You will need at least a 5 channel receiver, depending on how you power the receiver. Click here - Receivers for our full selection of 2.4GHz Hitec or full range 72MHz receivers

  • Servos - You will need seven servos (eight if running gas or glow). We recommend a HS-485HB Servo (33485S) Hitec/JR or Corona DS-538MG Digital Metal Gear Servo

  • Power System - You need minimum a 20CC Gas to 26CC Gas Engine. We recommend our RCGF 26CC Gas Engine swinging a RCGF 18 x 8 Wood Propeller or a RCGF 20CC Gas Engine Version 2 (Rear - B Crank Case) swinging a RCGF 16 x 6 Wood Propeller

  • Alternative Electric Power - If you want to run electric, we recommend a BP A4130-8 Brushless Outrunner Motor running a APC 16 x 10 Thin Electric Gray Composite Propeller (LP16010E) being powered by a Enerland XP3 22.2V 6600mAh Lithium Polymer Battery. Use an 80 amp ESC minimum - Feigao 80-Amp Brushless Speed Controller (FG-BLESC-80A) version 2

  • Receiver Battery - Use a 4.8V to 6V receiver battery. Or you can use a A123 Nanophosphate 6.6V 2300mAh Receiver Pack with Male Servo S-Connector / Deans Ultra Plug, and PQ Balance Connector and a BP Battery Eliminator Circuit

  • Servo Extensions - You will need four 12 inch extensions and two 6 inch "Y" connectors. We offer servo extension wire with either the Futaba Style Connector/Color Wire or Hitec / JR Style Connector/Color Wire

  • Adhesives - You will need five or 15 minute epoxy and thin and medium CA glue. These products can be found here Epoxy and CA Glues

  • SHIPPING NOTE - This kit has oversized shipping. Shipping will appear in shopping cart once you enter your zipcode during checkout. This kit does not ship outside the Continental US via our normal shipping channels. If you live outside of the Continental US, call for a shipping quote.
    Price: $338.00
    Currently Out Of Stock - Notify Me When Available or Special Order