View By Product Type
View By Manufacturer
Overstock Sales
Closeouts
Parfix Thin CA
Parfix Medium CA
Parfix Thick CA
Foam Safe Glues
Parfix Black Rubber Toughened CA
Epoxy
Miscellaneous Adhesives and Tapes
Adhesives Accessories
Accelerator
Debonder
 
Catalog > CA, Epoxy and Glues > Foam Safe Glues
Previous Item     Next Item     Show All Items       Add To Shopping Cart      
Foam Tac Adhesive 2oz bottle
Item: 3 of 3  

Click on image for larger or alternate view.
Bonds Depron, EPP, EPO, Balsa, Carbon Fiber, Elapor, and Polystyrene - No foaming, dries clear, stays flexible
This is one of the best adhesives on the market for adhering all of the common foams, plastics, and wood used in the RC Hobby. Once fully cured, the adhesive remains strong, flexible and waterproof.
HELPFUL HINTS
  • Less is more! Apply a thin line of Foam-Tac to surfaces; add more only if needed.

  • Foam-Tac's bond "welds" foam together for making invisible butt-joints & seams. Once cured, bond is stronger than the foam itself.

  • Great for reattaching broken ailerons.

  • Won't glue fingers together - not a cyanoacrylate.

  • Never leaves any residue on surfaces.

  • DIRECTIONS
  • All surfaces must be clean, dry, and free of dust and grease.

  • Remove white cap & save for storage. Screw on applicator tip & snip.

  • Apply a thin layer of glue to each side of materials to be joined.

  • Wait a few seconds and then firmly press parts together and immediately separate for 4-5 seconds more. Rejoin parts, firmly pressing surfaces together for a permanent bond.

  • Allow to dry for 20-30 minutes for a strong bond with a full cure within 24 hours or less.

  • ALWAYS REPLACE THE FLAT WHITE CAP AFTER EACH USE TO KEEP GLUE FROM THICKENING!

  • Click on the image below to see all of the products that Foam Tac can glue!
    Price: $11.99
    Add To Shopping Cart    
    Prices, product specifications, and product availability are subject to change without notice.
    © Copyright 1998-2013, 2014 BP Hobbies, LLC. All rights reserved.