View By Product Type
View By Manufacturer
Overstock Sales
Beacon Adhesives
Blue Bird
Castle Creations
Chargery Products
Cheetah Motors and ESCs
Cheetah Packs
Landing APC Props
Master Airscrew
HE Products
Hitec / Multiplex
Parson Adhesives
Tech-Aero Designs
Manufacturers > Chargery Products
Previous Item     Next Item     Show All Items       Add To Shopping Cart      
CCB-7N-EH Connector Conversion Board for EH Connectors For B6+ Smart Balancer - CLOSEOUT SALE
Item: 5 of 44  

Click on image for larger or alternate view.
  Connector     Pin Count     Approx. Male Connector
Dimensions (mm)
  Pin Spacing
Pitch (mm)
  Cell Count  
  A     7     19.4 x 3.62 mm     2.5 mm     6S  
  B     6     16.92 x 3.62 mm     2.5 mm     5S  
  C     5     14.4 x 3.62 mm     2.5 mm     4S  
  D*     4     11.92 x 3.62 mm     2.5 mm     3S  
  D1*     4     11.92 x 3.62 mm     2.5 mm     3S  
  E*     3     9.4 x 3.62 mm     2.5 mm     2S  
  E1*     3     9.4 x 3.62 mm     2.5 mm     2S  
  E2*     3     9.4 x 3.62 mm     2.5 mm     2S  
*- The D and D1 connectors are for 2*3S packs and the E/E1/E2 can be used for 3*2Spacks.
For 2S, 3S, 4S, 5S, 6S packs from FlightPower, Kokam, Groupner, and Thunder Power. To determine if this conversion board will work for you, measure the external dimensions of the balancer connector on your battery's balancer connector (the two dimensions as the connector end faces you). Then measure the pitch of the pin spacing. You measure the center to center distance to determine the in spacing. If you can not find the dimensions on this chart, then check the charts on the CCB-7 Connector Conversion Board for XH Connectors and CCB-7TPQF Connector Conversion Board
This product is used by the following product(s):
  • B6+ Smart Balancer

  • Price: $1.00
    Add To Shopping Cart    
    Prices, product specifications, and product availability are subject to change without notice.
    © Copyright 1998-2017, 2018 BP Hobbies, LLC. All rights reserved.