View By Product Type
View By Manufacturer
Overstock Sales
Futaba Straight Wire Extensions
Futaba Twisted Wire Extensions
Futaba Y Connectors
Plastic Switch Harnesses
Connectors With Wire Leads
JR/Hitec Straight Wire Extensions
JR/Hitec Twisted Wire Extensions
JR/Hitec Y Connectors
Gender Changers All Types
Three-Strand Servo Wire
Metal Switch Harnesses
Sub-Micro Connectors and Wire
Specialty Items
Battery Eliminator Circuits (BECs)
Telemetry Systems
Futaba Wire
JR/Hitec Wire
Catalog > Wire Extensions and Radio Accesories > Battery Eliminator Circuits (BECs)
Previous Item     Next Item     Show All Items       Add To Shopping Cart      
Cheetah 7A UBEC
Item: 4 of 15  

Click on image for larger or alternate view.
  Input Voltage:     5.0-33V  
  Output Voltage:     5.0V  
  Continuous Current:     7A  
  Peak Current:     7A  
  Regulator Type:     Switching  
  Connector:     Universal S-type / JR (fits most receivers)  
  Size:     45 x 22 x 10 mm / 1.8 x 0.87 x 0.39 in.  
  Weight:     15.7g / 0.56 oz  
7 amp switching Ultra Battery Eliminator Circuit (UBEC). Use instead of your speed controller's built-in BEC when in need of more current for servos. This unit can supply up to 7 amps continuous up to 33V (8S Lipo) of battery power. Switch-mode DC-DC conversion is highly efficient and heats up less than a linear voltage regulator. Twelve inch receiver leads are twisted in order to reduce noise.

Directions for use:

Solder in parallel with ESC. If your speed controller has a built-in BEC, cut and tape off the small red wire from the ESC's servo plug. Plug servo connector on BEC into receiver into any channel. Ensure polarity matches that of the other servo connectors.
Wiring diagram, image courtesy of RCGroups:

Price: $10.95
Add To Shopping Cart    
Prices, product specifications, and product availability are subject to change without notice.
© Copyright 1998-2017, 2018 BP Hobbies, LLC. All rights reserved.